Kestrel 800 Watt 48 Volt DC Wind Turbine
Application: Battery Charging / Off-grid
Accessories Included: Charge Controller, Divert Resistor
Manufacturer Part Number: e230i (Battery Charging)
The e230i is a distinctive 3 blade turbine that has a low start up torque, increasing its efficiency. The axial flux permanent magnet brushless alternator is powered by an optimised three blade rotor, with patented pitch control. The e230i maintains rated output in excess wind speeds, optimising the potential power output and energy yield.
The e230i is used predominantly on farms and rural installations for power where there is no grid connection available.
Features
- Off-grid electricity supply
- Charging batteries
- Power water pumps
- Supply the national grid
- Boost hybrid systems for increased energy efficiency
Specifications
| Peak Output Power |
850W |
| Power Output |
800W |
| Rated Power at 11m/s |
650W |
| Rotational Speed |
950rpm |
| Cut in Wind Speed |
2.5m/s |
| Cut out Wind Speed |
N/A |
| Rotor Diameter |
2.3m |
| Swept Area |
4.15sq m |
| Number of Blades |
3 |
| Blade Type |
Aerofoil |
| Lateral Thrust |
450N |
| Passive Speed Control |
1000rpm |
| Tower Top Mass |
45kg |
| Rated Sound Level |
<40dB |
| Protection |
IP55 |
| Generator Type |
PM 6ph |
| Output Voltage |
12,24,48, 110 and 200Vdc |
| Warranty |
2 years (extendable) |
| Routine Maintenance |
Periodic visual inspection |
