 |
 |
 |
|
BP Solar SX 380J, Solar Panel, 80 Watt, 12 Volt
J = Clear universal frame and standard J-Box
Detailed Description:
Solar electric modules convert the sun's energy into direct current (DC) electricity. BP Solar Home Solutions® systems use high performance monocrystalline or multicrystalline modules, also called solar panels.
BP Solar modules can be securely mounted to almost any kind of roof – flat or sloped – with just about any type of roofing material, including slate, metal, Spanish tile, asphalt and shake shingles.
High-efficiency photovoltaic module using silicon nitride multicrystalline silicon cells.
Performance
Rated Power: 80 watts
Power Tolerance: ±5%
Nominal Voltage: 12 volts
Warranty: 25 years
Configuration
J BP 380J Clear Universal frame and standard J-Box
L BP 380L Unframed laminate version of BP 380S
S BP 380S Clear Universal frame with WireholdTM J-Box and and polarized Multicontact (MC) connectors
Electrical Characteristics:
Maximum Power (Pmax): 80 Watts
Voltage at Pmax (Vmp): 17.6 Volts
Current at Pmax (Imp): 4.5 Amps
Warranted minimum Pmax: 76 Watts
Short-circuit Current (Isc): 4.8 Amps
Open-circuit Voltage: 21.1 Volts
Temperature coefficient of Isc: (0.065±0.015)%/K
Temperature coefficient of Voc: -(80±10)mV/K
Temperature coefficient of Power: -(0.5±0.05)%/K
NOCT (Air 20C, Sun 0.8kW/m2, wind speed 1m/s: 47±2C
Maximum series fuse rating: 15 amp (380S 380L) / 20 amps (BP 380J)
Maximum system voltage: 600 V (US NEC), 1000V (TUV Rheinland & IEC 61215)
Mechanical Characteristics
- S,L,J Solar Cells : 36 cells (125 x 125 mm) in a 4 x 9 matrix connected in series
- S,L Output cables : RHW AWG #12 (3.3 mm2) cable with polarized weatherproof DC rated Multicontact connectors; asymmetrical lengths -900mm (-) and 800mm (+)
- J Junction box: J-Version junction box with 6 terminal
connection block; IP 65, accepts PG 13.5, M20, 1/2" conduit, or cable
fittings accepting 6 to 12 mm diameter cable. Terminals accept 8 to 14
AWG2 (2.5 to 10 mm) wire.
- S,J,L Diodes IntegraBusTM technology includes Schottky by-pass diodes integrated into the printed circuit bus.
- S,L,J Construction: Front: High transmission 1/8" (3 mm) tempered glass. Back: White back sheet; Encapsulated: EVA.
- S,J Frame: Clear anodized aluminum alloy type 6063T6. Silver universal frame.
Quality and Safety
- Manufactured in ISO 9001 certified factories; conforms to European
Community Directive 89/33/EEC, 73/23/EEC, 93/68/EEC; certified to IEC
61215
- Module power measurements calibrated to World Radiometric Reference
through ESTI (European Solar Test Installation at Ispra, Italy)
- Framed modules certified by TUV Rheinland as Safety Class II (IEC 60364) equipment for use in systems up to 1000 VDC
- Framed modules listed by Underwriter Laboratories for electrical and fire safety (Class C fire rating)
- Approved by Factory Mutual Research in NEC Class 1, Division 2, Groups C & D hazardous locations (J version only)
Qualifications Test Parameters
Temperature cycling range: 40F to 185F (-40C to 85C)
Humidity freeze, damp heat: 85% RH
Static load front and back (e.g. wind): 50 psf (2400 Pa)
Front loading (e.g. snow): 113 psf (5400 Pa)
Hailstone impact: 1" (25 mm) hail at 52 mph (23 m/s)
S,J
Dimensions (LWD): 47.60" x 21.14" x 1.97" (1209 x 537 x 50 mm)
Weight: 16.94 lbs (7.7 kg)
L
Dimensions (LWD): 47.1" x 20.9" x 0.75" (1197 x 530 x 19 mm)
Weight: 13.4 lbs (6.1 kg)
|
|
|
 |
|
 |
|
