Fronius IG personal display
Manufacturer Part Number: 4,240,108
Wireless display for use with up to 15 Fronius IG or IG Plus Inverters for home or office. The range is approximately 150 feet indoors and 450 feet outdoors. FCC Class 15 Part B compliant. Required one wireless card per Fronius Inverter. The Personal Display operates independent of or in tandem with the DATCOM data communication system. The display comes complete with rechargeable batteries and charger.
Features:
The Fronius IG Personal Display is a small device used to monitor inverter functions from up to 15 different inverters, thus allowing you to check your entire system from one place with ease instead of checking each individual inverter.
The Fronius IG Personal Display allows consumer to keep up with the output data from their Inverter without having to constantly keep running to the inverter to check the values. Simply place where desired and be able to read information from up to 15 different inverters.
- Monitors up to 15 IG Inverters in the same system
- 150 ft Indoors / 450 ft Outdoors
- 900 MHz (varying frequency)
- FCC Compliant
- Same Easy-to-Navigate LCD as FRONIUS IG
- View Total System & Individual Inverter Data
- kWh, $ Saved, CO2 Offset
- Power, Voltage, Current, Frequency
- Easy & Pro Levels to adjust the detail of the display's information
- Can be Used in Conjunction with DatCom System
- Rechargeable AA Batteries with DC Adapter
Detailed Description
Simple:
The FRONIUS IG Personal Display is easy to install and easy to use. It was designed with the homeowner in mind, and is exceptionally easy to navigate. The readout and interface are based on the same industry-leading display that comes standard on all FRONIUS IG Series inverters.
Field-Proven:
Although tested to 150 feet indoors and 450 feet outdoors, there are many reports from the field of the units transmitting from much farther distances. And because it is FCC compliant, your customers know it will not interfere with their other household devices.
Effective:
The FRONIUS IG Personal Display can aggregate data for up to 15 FRONIUS IG inverters or show data for each individual inverter in a system – meaning data from a system that is over 75 kW AC can be viewed together or as sub-systems.
Informative:
The FRONIUS IG Personal Display shows instantaneous data such as power, voltage and current, plus it will store the daily and cumulative values as well. The Display offers two levels of access: easy and pro. In the easy level, homeowners can view system basics like power, energy output, CO2 offset, and the number of dollars saved; meanwhile, the pro level offers more advanced users information like voltage, current and grid frequency.
Attractive:
The unit was designed with a backlit display and a stylish silver case to attract the attention of solar enthusiasts and their visitors alike. The display can mount on a wall near a thermostat or clock, or be placed on coffee table or nightstand.
Requirements:
The Fronius IG Personal Display requires the Fronius IG Personal Display Card which allows data transfer to the IG Personal Display by simply plugging the card into the display.
NOTE: Only for use with the Fronius IG or IG Plus inverters shipped from Fronius after 1 December 2005. Call Fronius with your inverter's serial number if you are uncertain about compatibility.
