Iota Solid DC > 40 Amp 24 VDC Power Converter and Battery Charger
Manufacturer Part Number: DLS-27-40
Converts 120 VAC to 24 VDC
The DLS-27-40 Power Converter/Battery Charger from IOTA Engineering converts nominal 108-132 AC voltage to 27.2 DC voltage for both DC load operation and 24V battery charging.
As a power supply, the unit's tightly controlled regulation allows the user to operate a nominal 24VDC load up to 40 amps.
As a battery charger, the unit will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time to minimize undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the DLS-27-40 will automatically drop the current, providing a float-charge to the battery to prevent self-discharge of the cells.
Specifications
DC Output Voltage (No Load) approx.
|
27.7 VDC
|
Output Voltage Tolerance (No Load)
|
+ or - .5%
|
Output Amperage, Max Continuous
|
40 Amps
|
Maximum Power Output, Continuous
|
1100 Watts
|
Ripple and Noise
|
<100 mV rms
|
Input Voltage Range
|
108 - 132V (AC)
|
Input Voltage Frequency
|
47-63 Hz
|
Input Wattage (Full Load)
|
1360 Watts
|
Maximum AC Current @ 108VAC
|
19.5 Amps
|
Typical Efficiency
|
> 80%
|
Max Inrush Current, Single Cycle
|
40 Amps
|
Short Circuit Protection
|
Yes
|
Overload Protection
|
100%
|
Line Regulation
|
100 mV rms
|
Load Regulation
|
<1%
|
Fan Control
|
Proportional
|
Thermal Protection
|
YES
|
Working Temperature Range
|
0° - 40°C
|
Storage Temperature
|
-20° to 80C°
|
Withstand Voltage
|
1700/1700/500
|
Dimensions
|
13" x 6.5" x 3.4"
|
Weight
|
7.8 lbs
|