Iota Solid DC > 45 Amp 12 VDC Power Converter and Battery Charger
Manufacturer Part Number: DLS-45-X
Converts 120 VAC to 12 VDC
The DLS-45-X Power Converter/Battery Charger from IOTA Engineering converts nominal 108-132 AC voltage to 13.4-14.8 DC voltage for both DC load operation and 12 V battery charging.
As a power supply, the unit's tightly controlled regulation allows the user to operate a nominal 12VDC load up to 45 amps.
As a battery charger, the unit will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time to minimize undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the DLS-45-X will automatically drop the current, providing a float-charge to the battery to prevent self-discharge of the cells.
Specifications
|
DC Output Voltage (No Load) approx.
|
13.6 VDC
|
|
Output Voltage Tolerance (No Load)
|
+ or - .7%
|
|
Output Amperage, Max Continuous
|
45 Amps
|
|
Maximum Power Output, Continuous
|
600 Watts
|
|
Ripple and Noise
|
<50 mV rms
|
|
Input Voltage Range
|
108 - 132V (AC)
|
|
Input Voltage Frequency
|
47-63 Hz
|
|
Input Wattage (Full Load)
|
750 Watts
|
|
Maximum AC Current @ 108VAC
|
11 Amps
|
|
Typical Efficiency
|
> 80%
|
|
Max Inrush Current, Single Cycle
|
30 Amps
|
|
Short Circuit Protection
|
Yes
|
|
Overload Protection
|
100%
|
|
Line Regulation
|
100 mV rms
|
|
Load Regulation
|
<1.5%
|
|
Thermal Protection
|
YES
|
|
Working Temperature Range
|
0° - 40°C
|
|
Storage Temperature
|
-20° to 80C°
|
|
Withstand Voltage
|
1700/1700/500
|
|
Dimensions
|
10.3" x 6.2" x 2.7"
|
|
Weight
|
5 lbs
|
Documentation
Features
- UL and CUL 458 Listed
- Clean, steady DC output operates your loads the way they were intended, avoiding potential damage to systems from errant DC voltage.
- Built-in protection features guard the unit against erratic line voltage that can occur from shore power or generator supplies
- 2-Gauge max. connection capagility decreases voltage drop for better battery charging and increased installation distance.
- Reverse Polarity Protection with simplified fuse removal protects the unit against damage from incorrect battery hook-up.
- Proportional fan control starts and stops slowly and operates at speeds directly proportional to unit temperature for whisper-quiet operation.
- Backed by IOTA with a full Three-Year Warranty.
- Optional IQ4-X charge control module for exceptional charging and battery life.
Product Description
12 Volt Battery Charger / Power Converter
The IOTA DLS-X Series delivers solid and dependable performance for a variety of demanding applications. The DLS-X provides clean DC output for safe operation of DC equipment, efficient battery charging, and built-in protection features against AC voltage spikes, brown-out conditions, and incorrect output polarity connections. IOTA DLS-X offers amperage models from 15 to 90 amps for 120-volt AC input and 12-volt DC output.
IQ4-X Charge Control
The DLS-X 12 volt models are available with the IQ4-X 4-Stage Charge Control Module for exceptional battery charging and maintenance.
Click here for IQ4-X
