Request a Quote!

You are here:Home > Racking > IronRidge > XR Mounting System > Clamps > End Clamps

IronRidge End Clamps

IronRidge end clamps are used when top-mounting modules to the top slot of either Standard (XRS) or Light (XRL) Rails. These clamps are not dependent upon the module’s mounting holes. For a clamp sizing chart, see below or click the "clamp sizing" link under resources.

Module Thickness Clamp Type Part Numbers
mm (ref) Inches End Clamp Mid Clamp
31.0 - 32.5 1.22–1.28 I 29-7000-125 29-7000-105
33.3 - 34.8 1.31-1.37 A 29-7000-134 29-7000-105
35.1 - 36.6 1.38–1.44 B 29-7000-224 29-7000-105
39.1 - 40.6 1.54–1.60 C 29-7000-157 29-7000-101
39.9 - 41.4 1.57–1.63 D 29-7000-160 29-7000-101
41.1 - 42.7 1.62-1.68 J 29-7000-165 29-7000-101
42.7 - 44.2 1.68–1.74 E 29-7000-171 29-7000-101
45.2 - 46.7 1.78–1.84 F 29-7000-214 29-7000-108
46.7 - 48.3 1.84-1.90 K 29-7000-187 29-7000-108
49.3 - 50.8 1.94–2.00 G 29-7000-204 29-7000-108
57.7 - 59.2 2.27-2.33 H 29-7000-230 29-7000-104