|
|
|
|
Kyocera KD185GX-LP, Solar Panel, 185 Watt, 12 Volt, Pallet of 20 Per Watt - $3.05
Detailed Description:
KD Modules Specifications
Kyocera is leading the solar industry with the development of the most
efficient and cost effective systems available. Our new and improved,
larger modules feature higher output per module and maintain the
thre-bus bar circuitry along with our d.Blue solar technology.
Features
- Locking Connector Specification
- Utilizes a larger, more powerful solar cell (156 mm)
- Upgrades KC200GT, KC175GT and KC130GT
- Output Cable - MC Connector (MC4)
Electrical Specifications at STC
Maximum Power: 135 watts
Tolerance: +5/-5%
Maximum Power Voltage: 17.7 volts
Maximum Power Current: 7.63 amps
Open Circuit Voltage: 22.1 Voc
Short Circuit Current: 8.37 amps
Maximum System Voltage: 600 volts
Temperature Coefficient of Voc: -8.0x10-1 V/C
Temperature Coefficient of Isc: 5.02x10-3 A/C
Series Fuse Rating: 15 amps
Warranty: 20 years power output, 1 year material and workmanship
Termination Method: Locking Plug-in Connectors (MC4)
NEC 2008 Compliant
UL 1703 Listed
Factory ISO 9001 and ISO 14001
Dimension (LWD): 59.1"x 26.3 x 1.4" (1500 x 668 x 36 mm )
Weight: 28.7 lbs (13.0 kg)
Additional Information:
All Kyocera KC series solar modules are supplied with bypass diodes installed inside of the junction box. Bypass diodes are installed across eighteen series cells, accomplished by the diode terminal in the J-Box.This diode terminal is not usable for interconnection wiring between modules. KC85T and KC130TM modules include an isolated post inside the J-Box for parallel splicing wiring from adjacent modules.
* ‘M’ style junction box standard with KC85T and KC130TM solar modules.‘G’ style junction box standard with KC40T, KC50T and KC65T modules.Multi-contact connectors used on KC130GT, KC175GT & KC200GT. All Kyocera solar modules have one opening in the junction box for wiring purposes. In some cases, wiring multiple solar modules together may result in one module with a remaining opening in the J-Box. A sealing hole plug may be required."
|
|
|
|
|
|
|