NEP > Northern Electric 800 Watt MC4 Micro Inverter - for up to two 600 Watt solar panels
NEP BDM-800, including 0.5m AC cable, connecting to trunk cable
(approximately 800Wac) 5 micros per string (208v/240v)
Can be configured for 240 Single Phase or 208 Three Phase and 230 VAC
|
Model
|
BDM-800
|
|
Series
|
BDM
|
|
Manufacturer
|
NEP (Northern Electric Power)
|
Mechanical
|
Type
|
Grid Tie - Micro Inverter
|
|
Weighted Averaged Efficiency (CEC)
|
96.50%
|
|
Night Time Rate Loss (Wp)
|
0.11
|
|
Over/Under Voltage Protection
|
YES
|
|
Over/Under Frequency Protection
|
YES
|
|
Anti-Islanding Protection
|
YES
|
|
Over Current Protection
|
YES
|
|
Reverse DC Polarity Protection
|
YES
|
|
Overload Protection
|
YES
|
|
Protection Degree
|
NEMA-6 / IP-66 / IP-67
|
|
Ambient Temperature Range
|
-40°F to +149°F (-40°C to +65°C)
|
|
Operating Temperature
|
-40°F to +185°F (-40°C to +85°C)
|
|
Approved for wet locations
|
Yes
|
|
Enclosure
|
Class II double-insulated, corrosion resistant polymeric enclosure
|
|
Environmental category / UV exposure rating
|
NEMA Type 6 / outdoor
|
|
Cooling
|
Natural Convection - No fans
|
|
Connectors
|
MC4 adapter cable (included)
|
|
Dimensions (W x H x D)
|
8.8” x 8.2” x 1.38”
|
|
Weight
|
6.4 lbs
|
|
Environment Category
|
Indoor and outdoor
|
|
Wet Location
|
Suitable
|
|
Pollution Degree
|
PD 3
|
|
Overvoltage Category
|
II(PV), III (AC MAINS)
|
|
Product Safety Compliance
|
• 240 and 208 VAC
UL 1741 SB
CSA C22.2
No. 107.1
• 230 VAC
IEC/EN 62109-1
IEC/EN 62109-2
|
|
Grid Code Compliance* (Refer to the label
for the detailed grid code compliance)
|
• 240 and 208 VAC
IEEE 1547
• 230 VAC
VDE-AR-N 4105*
VDE V 0126-1-1/A1
AS 4777.2 & AS
TOR
Erzeuger Typ A
COMPLIANCE
*NEC 2020 Section 690.11 DC Arc-Fault Circuit Protection
*NEC 2020 Section 690.12 Rapid Shutdown of PV Systems
on Buildings
*NEC 2020 Section 705.12 Point of Connection (AC Arc-
Fault Protection)
*Rule-21 Certified
*HECO Certified
*UL1741 SB
*SU1741 SB
|
|
Shipping Method
|
Ground
|
Input (DC)
|
Max Recommended PV Power (Wp)
|
650 * 2
|
|
Max DC Open Circuit Voltage (Vdc)
|
60
|
|
Max DC Input Current (Adc)
|
17 x 2
|
|
MPPT Tracking Accuracy
|
>99.5%
|
|
MPPT Tracking Range (Vdc)
|
22-55
|
|
Isc PV (absolute maximum) (Adc)
|
20 x 2
|
|
Maximum Inverter Backfeed Current to the Array (Adc)
|
0
|
Output (AC)
|
Peak AC Output Power (Wp)
|
800
|
|
Rated AC Output Power (Wp)
|
• 768 @ 240 VAC
• 700 @ 240 VAC
• 750 @ 230 VAC
|
|
Nominal Power Grid Voltage (Vac)
|
240, 208, 230
|
Allowable Power Grid Voltage (Vac)
* All NEC required adjustment factors have been considered for AC outputs. AC current outputs will not exceed stated values for Rated Output AC Current
|
• 211-264* @ 240 VAC
• 183-228* @ 208 VAC
• Configurable* @ 230 VAC
|
|
Allowable Power Grid Frequency (Hz)
|
• 59.3 - 60.5* @ 240 and 208 VAC
• Configurable* @ 230 VAC
|
|
THD
|
• -0.99>0.9 (adjustable) @ 240 and 208 VAC
• 0.8un>0.8ov @ 230 VAC
|
|
Rated Output Current (Aac)
|
• 3.2 @ 240 VAC
• 3.36 @ 240 VAC
• 3.26 @ 230 VAC
|
|
Current (inrush)(Peak and Duration)
|
9.4A, 15us
|
|
Nominal Frequency (Hz)
|
• 60 Hz @ 240 and 208 VAC
• 50 Hz @ 230 VAC
|
|
Maximum Output Fault Current (Aac)
|
9.6A peak
|
|
Maximum Output Overcurrent Protection (Aac)
|
20
|
Maximum Number of Units Per Branch (20A)
(All NEC adjustment factors have been considered)
|
• 5 @ 240 VAC
• 4 @ 208 VAC
• 5 @ 230 VAC
|
Features
- U.S. California Rule 21 Certified
- Low cost $/watt microinverter
- High continuous output power up to 768Wac, recommended
for up to two 600W modules
- High efficiency; 96.5% CEC rating
- Globally certified for UL1741, SAA, TUV, VDE-AR-N
- 4105, VDE 0126, TOR Erzeuger Type A
- Integrated grounding for easy installation
- NEMA-6/IP-66/IP-67 enclosure rating
- Integrated monitoring and power line communication with BDG256 gateway
- Compatible with BDM-650 and BDM-550
BDM 800 Microinverter Detailed Description
The BDM-800 is a microinverter designed to generate more energy at a low cost and with an efficiency of 95%. It has an integrated monitor and power line communication with BDG-256 gateway. It can be connected to the BDM-300, BDM-250, and BDM-300×2. This micro inverter is globally certified for Rule 21, UL1741, TUV, NEMA-6/IP-66/IP-67 enclosure rating.
International certificates
Globally certified for Rule 21 UL 1741 CSA C22.2 No 107.1 NEMA-6/IP-66/IP-67 enclosure rating High efficiency with 95.5% CEC.
Simple and practical design
Dimensions: 8.8” x 8.2” x 1.38”, Weight (including AC cable): 6.4 Ibs. Operating Temperature : -40°F to +185°F Cooling: Natural convection.
Simple installation
Integrated grounding for easy installation Integrated monitoring and power line communication with BDG-256 gateway Can connect with BDM-300, BDM-250 and BDM-300X2.
