PowerMax 100 Amp 12 Volt Battery Charger
Manufacturer Part Number: PMBC-100-ADJ
PowerMax PMBC Power Supply/Battery Chargers provide clean and reliable power for charging and maintaining battery state-of-charge during service reflash, complex maintenance, and in the showroom where vehicle demonstrations can require significant power from the battery.
Specifications
|
Model
|
PMBC-100-ADJ
|
|
DC Output Voltage (no load)
|
14.8 Volts
(Adjustable)
|
|
Max Amperage Output, Max Continuous
|
100 Amps
|
|
Maximum Power Output, Continuous
|
1440 Watts
|
|
Maximum AC Current
|
13 Amps
|
|
Fan Control
|
Proportional
|
|
|
Short Circuit Protection
|
Yes
|
|
Fixed Output Range
|
13 to 16.5 Volts
|
|
|
Dimensions (L x W x H)
|
7.15" x 11.5" x 3.48"
|
|
Weight
|
8.0 lbs
|
Product Description
To obtain the highest quality scan, the first, and arguably the most important step is to
provide proper battery support to the vehicle before beginning the diagnostic and vehicle
electronic scan process. The PMBC Series Battery Charger / Maintainer is the best choice.
Standard Battery chargers or a jump box are not recommended as they will not provide the proper battery support to the vehicle. Battery chargers can overcharge and “cook” a battery, and jump boxes can go dead or lose their charge over time.
A quality battery voltage maintainer provides uniform voltage to the vehicle for longer
periods of time compared to an unsupported battery. The bottom line is to make sure that
before you begin any diagnostic or vehicle electronic scan using the PMBC Series, the
car has proper battery support to provide the best possible outcomes.
When vehicle voltage levels fall below the normal levels, diagnostic results are no longer
accurate. Fluctuations in battery voltage can also cause additional codes to appear. If an
unsupported battery fails, or fluctuates, during programming it can cause the programming
to fail, which can be very costly.
Features
- Provides a constant clean Fixed Output Voltage for Power Supply during diagnostics and reprogramming through a fully regulated DC output.
- Available in 55A, 75A, 100A and 120A outputs
- Output Voltage can be Fixed between 13Vdc – 16.5Vdc to meet vehicle battery requirements including Lithium
- Smart Battery Charging mode for general battery care and maintenance – 14.6Vdc / 13.6Vdc / 13.2Vdc (Factory Setting)
- Digital Output Voltage Display
- 15 feet cables with clamps
- On/Off Switch
- LED indicator to show unit is on and working
Multiple Protection Features Include:
- Overtemp protection
- Brownout Input
- Reverse Polarity
- Over-Current
- 2 Year Warranty
