 |
 |
 |
|
Iota DLS-UI-27-40 > 24 V 40 Amp Power Supply - Battery Charger
Manufacturer Part Number: DLS-UI-27-40
The DLS-UI-27-40 is a Power Factor Corrected Power Supply / Battery Charger that converts 120 to 240 volts A.C. to 27.2 volts D.C. As a power supply, tightly controlled
regulation allows the user to operate any 24 volt nominal D.C. load up to the unit’s rated output current. As a battery charger, the unit will maintain the battery, delivering
full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver maximum current for the necessary period of time that minimizes undue stress
to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears full capacity, the unit will float-charge the battery to prevent self-discharge of its cells.
Specifications
|
DC Output Voltage (No Load) approx.
|
27.2V VDC
|
|
Output Voltage Tolerance (No Load)
|
+ or - .5%
|
|
Output Amperage, Max Continuous
|
40 Amps
|
|
Output Voltage (Full Load) approx.
|
>27.0V (DC)
|
|
Maximum Power Output, Continuous
|
1100 Watts
|
|
Ripple and Noise
|
<100 mV rms
|
|
Input Voltage Range
|
108 - 264 VAC
|
|
Input Voltage Frequency
|
47-63 Hz
|
|
Maximum AC Current @ 108VAC
|
11.5 Amps
|
|
Typical Efficiency
|
80%
|
|
Max Inrush Current, Single Cycle
|
75 Amps
|
|
Short Circuit Protection
|
Yes
|
|
Overload Protection
|
> 100%
|
|
Line Regulation
|
100 mV rms
|
|
Load Regulation
|
< 1%
|
|
Fan Control
|
Proportional
|
|
Thermal Protection
|
YES
|
|
Working Temperature Range
|
0°C to 40°C
|
|
Storage Temperature
|
-20°C to 80°C
|
|
Withstand Voltage(VDC)
|
1700 / 1700 / 500
|
|
Dimensions
|
13" x 6.75" x 3.420"
|
|
Weight
|
9.0 lbs
|
Documentation
Features:
-
Power Factor Correction provides more efficient utility consumption and allows for operation from a 15A circuit.
-
Universal Input accepts AC voltage from 120 to 240 VAC.
- Clean and steady DC Output operates your loads the way they were intended, avoiding potential damage to systems from errant DC voltage.
-
Built-in protection features guard the unit against erratic line voltage that can occur from shore power or generator supplies.
-
Reverse Polarity Protection to protect against damage from incorrect battery hook-up, using readily available fuse types that are easy to replace.
-
Proportional fan control for whisper-quiet operation.
- Switch-mode technology
-
Current limit, thermal and overload protection
- Lower operating temperature
- Charging Jack option for normal and high-stage battery charging applications
-
IEC Input Plug allows connection to all global connection types.
Iota 40 Amp Power Supply - Battery Charger - DLS-UI-27-40
|
|
|
 |
|
 |
|
|
|
