MorningStar SunGuard 4.5 Amp 12 Volt PWM Charge Controller
Manufacturer Part Number: SG-4
Morningstar's SunGuard SG-4 is the world's leading single module controller. We have combined all the advantages of our SunSaver charging circuit with less expensive packaging to provide an economical controller for small PV systems. Morningstar’s SunGuard is the most advanced small, economical solar charge controller on the market today.
SunGuard’s technology provides:
- Exceptional Reliability
- PWM Battery Charging
- Consistent High Quality
- Low Cost
Features
- ISO 9002 quality programs
- Series design (not shunt)
- 100% solid state
- True 0 to 100% PWM duty cycle
- Setpoint accuracy to 60 mV
- Temperature compensation: A sensor measures ambient
temperature and corrects the constant voltage setpoint by
–28 mV per °C with a 25°C reference. This works best if the
SunGuard and battery are in a similar thermal environment.
- Rated for 25% overloads
- No need to derate
- Lightning protected with 1500 W transorbs
- Self-consumption is 6 mA
- Fully encapsulated in epoxy potting
- ABS plastic, impact-resistant case
- Outdoor rated, Hypalon connecting wires
Advantages
SunGuard can be mounted outdoors. Do not expose to ambient temperatures above 60°C. Make sure that water will drain from inside the case.
SunGuard’s PWM charging compared
to On-Off solar regulators:
- Typically 30% more solar energy into
the battery per day
- Average battery State-of-Charge is
90 – 95% compared to 55 – 60% for
On-Off regulators
Specifications
Rated Solar Input
|
4.5 Amps
|
Max. Input (5 min.)
|
5.5 Amps
|
System Voltage
|
12 Volts
|
Max. Solar Voltage
|
30 Volts
|
Regulation Voltage
|
14.1 Volts
|
Accuracy
|
60 mV
|
Self-consumption
|
6 mA
|
Temp. Compensation
|
–28 mV/°C
|
Reverse Current Leakage
|
<10 uA
|
Operating Temperature
|
–40 to +85°C
|
Wire Size
|
#16 AWG
|
Detailed Description
The MorningStar SunGuard is a fully epoxy encapsulated outdoor rated 4.5A "ice cube" sized 12V PWM charge controller. It has built-in temperature compensation, lightning protection and easy 4-wire hookup. The SunGuard's regulation voltage is set at 14.1 (best for sealed or gel batteries) and is not adjustable for battery type like MorningStar's other controllers. It's dimensions are 2.5" x 2.0" x 1.5" and it weighs just 3 oz. Use only with a 12 volt battery.
The SunGuard is able to match the quality and
performance of the world-leading SunSaver
controllers because:
- SunGuards are made on the same high
speed, automated production lines
- SunGuards use the same charging circuit
- SunGuards use the same high quality
components
Advanced PWM Battery Charging
SunGuard uses an advanced series PWM charge control for constant voltage charging. A true 0 to 100% PWM duty cycle is very fast and stable for highly efficient charging.The SunGuard prevents the battery from discharging through the solar array at night. There is no need to install a blocking diode for this purpose.
Warranty: Five year warranty period. Contact Morningstar for complete terms.