UniRac SunFrame 192" Capstrip > 1 Unit

Size: F
Finish: Dark Bronze Anodized (Black)
Replaces: 321107
Manufacturer Part Number: 202004D

Capstrip fits modules size F (45 - 47 mm / 1.77 - 1.85 in. thick). For use with Unirac SunFrame. Requires 3/4" cap strip screw.

Features

Superior Aesthetics:Visible components match clear or dark module frames.
Optimized module performace, system spacing allows convection cooling.
Ease of Installation: Minimized penetration with longer attachment spans than comparable products.
Complete technical Support: Installation and code compliance documentation

Specifications

Unirac Letter	Module Thickness	Screw Length
A	24 - 26 mm 0.94 - 1.02 in	Not Available
B	30 - 32 mm 1.18 - 1.26 in	Not Available
C	34 - 36 mm 1.34 - 1.42 in	3/4"
D	38 - 40 mm 1.50 - 1.57 in	3/4"
K	39 - 41 mm 1.54 - 1.61 in	Not Available
J	41 - 43 mm 1.61 - 1.69 in	3/4"
F	45 - 47 mm 1.77 - 1.85 in	1"
M	47 - 49 mm 1.85 - 1.93 in	Not Available
E	50 - 52 mm 1.97 - 2.05 in	1-1/4"
N	57 - 59 mm 2.24 - 2.32 in	Not Available
H & L	Sanyo lipped modules	Not Available
G	Sharp lipped modules	Not Available

Detailed Description

A Stunning Environmental Statement

Unirac’s SunFrame system leads the PV market with it's superior aesthetics. It's sleek design is engineered to sit low to the roof without gaps and implements shared rails for the best value.

Low and clean lines give SunFrame two advantages. The finished array stands off the roof just enough for cooling airflow to optimize module performance while all modules sit in low, gap-free rows without protrusions from the sides of the array.

Attachments and Flashing Systems:

Cap Strips
Splices
Standoffs & Flashings
L-Feet
L-Feet Adjusting Sliders
End Caps