Victron Energy > 3000 Watt 50A MultiPlus-II Inverter & Charger - 12V DC & 2x 120V AC
Application
Mobile or Off-Grid Applications.
Note: This product is specifically designed for integration in 50A RV applications. This model includes a two pole 50A AC Input / Output.
Specifications
|
Model
|
MultiPlus-II 12/3000/120-50
(PMP122305100)
|
|
Series
|
MultiPlus-II
|
|
Manufacturer
|
Victron Energy
|
Mechanical
|
Type
|
Split Phase
|
|
Operating Temperature Range
|
-40 to +65°C (-40 -150°F) (fan assisted cooling)
|
|
Cooling
|
Fan assisted cooling
|
|
Dimensions (H x W x D)
|
23" x 11" x 6"
|
|
Weight
|
48 lbs
|
|
Safety
|
EN-IEC 60335-1, EN-IEC 60335-2-29, UL 458
|
|
Shipping Method
|
Ground
|
MultiPlus-II 2x120V
|
|
12/3000/120-50
|
|
PowerControl & PowerAssist
|
Yes (on L1 input)
|
|
Transfer switch
|
50 A
|
|
Maximum AC input current
|
50A (each leg)
|
Inverter
|
DC Input voltage range
|
9.5 – 17 V
|
|
Output when in inverter mode
|
Output voltage: 120 VAC ± 2%
Frequency: 60 Hz ± 0,1% (1)
|
|
Cont. output power at 25°C (3)
|
3000 VA
|
|
Cont. output power at 25°C
|
2400 W
|
|
Cont. output power at 40°C
|
2200 W
|
|
Cont. output power at 65°C
|
1700 W
|
|
Maximum apparent feed-in power
|
2500 VA
|
|
Peak power
|
5500 W
|
|
Maximum efficiency
|
93%
|
|
Zero load power
|
15 W
|
|
Zero load power in AES mode
|
10 W
|
|
Zero load power in Search mode
|
4 W
|
Charger
|
AC Input
|
Split phase: 180-280 VAC 45 – 65 Hz
Single phase: 90-140 VAC 45 – 65 Hz
|
|
Charge voltage 'absorption'
|
14.4 V
|
|
Charge voltage 'float'
|
13.8 V
|
|
Storage mode
|
13.2 V
|
|
Maximum battery charge current (4)
|
120 A
|
|
Battery temperature sensor
|
Yes
|
Product Desiscription
The Victron MultiPlus-II 2 x120V (MultiPlus-II 12/3000/120-50) is the perfect one-box mobile solution for standard North American 50A 120/240VAC split-phase applications. Whether it is supplied from shore power or a generator, the MultiPlus-II 2x120V can accept and passthrough both lines of a 120/240V supply, with the capability to utilize the full 50A for charging and AC loads. When connecting to a single phase 120V supply, the L1 input of the MultiPlus-II 2x120V will accept incoming power for charging and passthrough, while combining the L1 and L2 outputs for single-phase 120V on each line.
The MultiPlus switches to inverter operation when no AC source is available. The inverter output is also 120V single phase. In inverter mode, the MultiPlus-II 2x120V internally connects both lines L1 and L2 together to provide 120VAC to loads on either output. Therefore, in all connection circumstances, both sides of a distribution panel will be supplied with 120V. However, 240VAC is only available when the MultiPlus is supplied by a split phase 120/240VAC source. This prevents heavy loads such as water heaters or 240V air conditioners from discharging the battery.
The MultiPlus-II 2x 120V has all of the expected features of our versatile inverter/charger range, including PowerControl, PowerAssist, Input Current Limit, two AC outputs, as well as parallel and 3ph configuration for larger capacity VE.Bus systems. Suitable for LiFePO4 batteries and a variety of other battery technologies.
Features
- Multifunctional, with intelligent power management
- Two AC Outputs
- Virtually unlimited power thanks to parallel operation
- Split phase options
- On-site system configuring, monitoring and control
- Remote configuring and monitoring
- Input voltage range: 9.5 to 17 Volts DC
- Output voltage: 120 Volts AC +/- 2% @ 60 Hz
- Continuous output power (77° F): 3,000 Volt-Amps (VA)
- Zero load power: 19 Watts; 4 Watts in Search mode
- Maximum battery charge current: 120 Amps
