 |
 |
 |
|
Enphase > IQ Combiner 5 with Communications Gateway, 120/240 VAC
Manufacturer Part Number:
X-IQ-AM1-240-5
IQ Combiner 5 with IEEE 1547:2018 compliant IQ Gateway
Enphase Energy Combiner 5
The IQ Combiner 5consolidates interconnection equipment into a single enclosure and streamlines IQ Series Microinverters and IQ Gateway installation by providing a consistent, pre-wired solution for residential applications. IQ Combiner 5/5C uses wired control communication and is compatible with IQ System Controller 3/3G and IQ Battery 5P.
The IQ Combiner 5, along with IQ Series Microinverters, IQ System Controller 3/3G, and IQ Battery 5P provides you with a complete grid-agnostic Enphase Energy System.
|
IEEE 1547-2018 requires a local DER (distributed energy resources) communications interface located at the DER site. The IQ Gateway provides the local DER interface in Enphase Energy Systems.
IEEE 1547-2018 requires the local communications interface to remain available whenever the DER is operating. This indirectly creates a requirement for the IQ Gateway not to reboot during and following a low voltage ride through event. The IQ Gateway hardware was redesigned to meet this requirement so installers must only choose from the list of supported hardware and be running software versions 7.3.460 or later to be fully compliant.
|
Note: Eaton BR series breakers (BR220) required, sold separately.
Also sold separately, not included with Enphase X-IQ-AM1-240-5 combiner:
•
Enphase COMMS-KIT-02 > Enphase Communications Kit
|
NOTE: To ensure the best installation experience, Enphase is requiring that installers complete IQ training and certification online
to enable IQ system commissioning in the field
. For Enphase PV-certified installers, IQ8 training is an add-on qualification course and
for those who are non-certified installers you can access the training by
completing an online assessment through Enphase University.
We recommend having 100% of your installers take this certification course if you do Enphase installations.
|
Mechanical
|
Type | Combiner 5 (X-IQ-AM1-240-5)
IQ Combiner 5 with IQ Gateway printed circuit board for integrated revenue grade PV production metering (ANSIC12.20 ±0.5%), consumption monitoring (± 2.5%) and IQ Battery monitoring (±2.5%). Includes a silver solar shield to deflect heat
|
|
Integrated Wi-Fi
|
802.11b/g/n (dual band 2.4 GHz/5 GHz), for connecting the Enphase cloud via the internet
|
|
Wi-Fi range (recommended)
|
10 meters
|
|
Ethernet
|
Optional, 802.3, Cat5E (or Cat 6) UTP Ethernet cable (not included), for connecting to the Enphase Cloud via the internet
|
|
Mobile Connect
|
CELLMODEM-M1-06-SP-05 or CELLMODEM-M1-06-AT-05 (included with IQ Combiner 5C Only)
|
|
Dimensions
|
14.75" W x 19.5" H x 6.63" D
Height is 21.06" with mounting brackets.
|
|
Weight
|
16.5 lbs
|
|
Altitude
|
To 2,600 meters (8,530 feet)
|
|
Compliance, IQ Combiner
|
IQ Combiner 5 with IQ Gateway printed circuit board for integrated revenue grade PV production metering (ANSIC12.20 ±0.5%), consumption monitoring (± 2.5%) and IQ Battery monitoring (±2.5%). Includes a silver solar shield to deflect heat
|
|
Compliance, IQ Gateway
|
UL 60601-1/CANCSA 22.2 No. 61010-1, IEEE 1547: 2018 (UL 1741-SB, 3rd Ed.)
IEEE 2030.5/CSIP Compliant
Production metering: ANSI C12.20 accuracy class 0.5 (PV production)
|
Features
Smart
- Includes IQ Gateway for communication and control
- Supports flexible networking: Wi-Fi, Ethernet, or cellular
- Provides production metering (revenue grade) and consumption monitoring
Easy to Install
- Mounts to one stud with centered brackets
- Supports bottom, back, and side conduit entry
- Supports up to four 2-pole branch circuits for 240 VAC plug-in breakers (breakers not included, sold separately)
- 80 A total PV branch circuits
Reliable
- Durable NRTL-certified NEMA type 3R enclosure
- 5-year limited warranty
- Two years labor reimbursement program coverage included for both the IQ Combiner SKUs
- UL1741 listed
|
|
|
 |
|
 |
|
|
|
