 |
 |
 |
|
Briggs & Stratton SimpliPHI 6.6, Sol-Ark 12k Bundle > 12,000 Watt Solar Inverter with 48 Volt 13.3kWh Home Battery | 2 Battery Modules | Stackable
Wire-Free, Stackable Design
The Briggs & Stratton SimpliPHI 6.6 Battery is a revolutionary energy storage solution. In a world where time is of the essence, this cutting-edge battery is a game-changer, boasting an installation time of less than 5 minutes. Stack 3 units effortlessly to unlock nearly 20 kWh of compact capacity. Engineered for ease of installation, the SimpliPHI 6.6 features our revolutionary RapidStak™ connectors that simply click into place, eliminating the need for tedious wiring or DIP switches. And it's outdoor-rated, so no additional cabinets needed.
Backed by the trusted name of Briggs & Stratton and designed to integrate seamlessly with Sol-Ark® inverters.
|
Model
|
SimpliPHI 6.6 Bundle | Sol-Ark 12k Inverter with SimpliPHI 6.6 two Battery Module Stacks with BMS, and wall or floor base. This bundle also includes the EnergyTrak Monitoring and Gateway
|
|
Series
|
SimpliPHI 6.6 System
|
|
Manufacturer
|
Briggs & Stratton & Sol-Ark
|
|
All Hybrid Inverter PV Systems will need rapid shutdown. The IMO BG10P34-11 remote shutdown button is an outdoor initiation switch that can be used to trigger PV system rapid shutdown.
IMO RSD Button BG10P34-11 > Rapid Shutdown Button compatible with APsmart Rapid Shutdown System
IEEE 1547-2018 requires the local communications interface to remain available whenever the DER is operating. This indirectly creates a requirement for the IQ Gateway not to reboot during and following a low voltage ride through event. The IQ Gateway hardware was redesigned to meet this requirement so installers must only choose from the list of supported hardware and be running software versions 7.3.460 or later to be fully compliant.
|
Features:
- Faster Installations -
Our unique RapidStak connector includes all communications and power in one connection. Assemble a stack of 3 in under 5 minutes.
- Scalable for Any Application -
Designed for maximum versatility, each battery delivers 6.65 kWh.2 Stack 3 for 19.95 kWh in a compact footprint. Scale up to 6 stacks for 119.7 kWh of energy.
- Choose Your Inverter -
Designed to integrate with SimpliPHI®, Sol-Ark® and other leading inverters, offering ultimate flexibility and faster commissioning.
-
Validated to the Industry's Toughest Safety Standards -
UL 1642, UL 1973, UN 3480, UN DOT 38.3, UL 9540 Edition 3 (in progress). Tested to UL 9540A.
- Wire and Hassle Free -
No wires, no DIP switches, no complications. Installation requires fewer tools and accessories, and less cost.
- Versatile Installation Options -
IP65 rating supports all weather conditions for both indoor or outdoor installations. No cabinets needed. Ground or wall mount.
-
Designed for Versatility -
Use for back-up power, time-of-use utility savings, solar+storage, or off-grid power.
- Safer Battery Chemistry -
Our lithium ferro phosphate (LFP) battery designs have been utilized for decades and proven in the harshest environments.
Briggs & Stratton SimpliPHI 6.6 - Documentation
|
Specsheet
|
Briggs & Stratton SimpliPHI 6.6 Battery
|
|
Sell Sheet
|
Briggs & Stratton SimpliPHI 6.6 Battery
|
Sol-Ark 12k-2P Documentation
*By completing the Solar Install Verification checklist,
you save time not having to troubleshoot and
it is required to register the warranty!
Sol-Ark Inverter Registration Page
Helpful Links: Sol-Ark Resources for Vendors and Installers
VPP ConnectedSolutions - The Highest Earning Grid Sell Back Program
As of now, if you live in New Hampshire, Connecticut, Massachusetts, or Rhode Island you can share power with the grid during times that it is needed.
Click here to learn more.
VPP ConnectedSolutions - The Highest Earning Grid Sell Back Program
As of now, if you live in New Hampshire, Connecticut, Massachusetts, or Rhode Island you can share power with the grid during times that it is needed.
Click here to learn more.
|
|
|
 |
|
 |
|
|
|
