Quick Mount PV > QBase Post-Style Mount - BASE Only - Box of 20

QBase Mount and 1, 5/16’ bolt to attach the post of your choice of length. Fastener Screws / Lag Bolts to attach to the roof NOT included: Fasteners and mounting location should be determined by the engineer of record and approved by the AHJ prior to use, and shall have adequate pullout strength and shear capacity.

Quick Mount’s QBase Low Slope Mount takes the traditional base-and-post PV mount to its ultimate level. The cast-aluminum QBase reinforced foundation is the strongest you can buy for mechanically attaching commercial PV systems to TPO, PVC, EPDM, built-up asphalt, and virtually all other non-metal low slope. roofs.

Properly flashing penetrations in PVC, TPO and other membrane-type roofing requires the use of manufacturer-specific materials to ensure the flashing bonds chemically with the field membrane (ask the roofer of record or your roofing supplier).

Features

• Code compliant for all non-metal low slope roofs
• QBase is the strongest off-the-shelf mechanical mount
• All exposed hardware is 18-8 stainless steel
• Attaches to roof with 2 or 4 fasteners
  (Note: Fastener Screws / Lag Bolts NOT included)
• Meets or exceeds roofing industry best practices
• All fasteners and hardware included
• 25-year warrant; 50-year expected life

These mounts use Quick Mount PV’s patented QBlock waterproofing technology to seal the roof penetrations, and aluminum and stainless steel parts to secure the conduit for the life of the system.