Enphase Microinverter > IQ 8M 330W MC4 Micro Inverter - IQ System "M" Series
The new Enphase “M” style micro inverters are the same as the previous Enphase IQ8 micro inverters, except further refined with the MC4 Connectors now integrated directly to the Enphase “M” style micro inverter. This integration speeds up installation by eliminating the need to attach the Q-DCC-2 MC4 adapter cable into each individual micro inverter during installation.
The IQ8M micro inverter from Enphase are designed to handle 260 to 460 watt solar panels. The IQ8M is compatible with 60-cell/120 half-cell and 72-cell/144 half-cell solar panels.
240 Split Phase ONLY.
IQ8 Series Microinverters are UL Listed as PV Rapid Shut Down Equipment and conform with various regulations, when installed according to manufacturer’s instructions.
|
Model
|
IQ8M-72-M-US
|
|
Series
|
IQ8
|
|
Manufacturer
|
Enphase Energy
|
|
NOTE: To ensure the best installation experience, Enphase is requiring that installers complete IQ8 training and certification online
to enable IQ8 system commissioning in the field
. For Enphase PV-certified installers, IQ8 training is an add-on qualification course and
for those who are non-certified installers you can access the training by
completing an online assessment through
Enphase University
.
We recommend having 100% of your installers take this certification course if you do Enphase installations.
|
Mechanical
|
Type
|
Grid Tie - Micro Inverter
|
|
Ambient Temperature Range
|
-40°C to +65°C
|
|
Approved for wet locations
|
Yes
|
|
Enclosure
|
Class II double-insulated, corrosion resistant polymeric enclosure
|
|
Environmental category / UV exposure rating
|
NEMA Type 6 / outdoor
|
|
Cooling
|
Natural Convection - No fans
|
|
Connectors
|
MC4 |
|
Dimensions (W x H x D)
|
8.35" x 6.89" x 1.19" (without bracket)
|
|
Weight
|
2.38 lbs
|
|
Shipping Method
|
Ground
|
Input (DC)
Commonly used module pairings:
Recommended PV Power (STC)
|
260 W–460 W +
|
|
Module compatibility
|
60-cell/120 half-cell and 72-cell/144 half-cell
|
|
MPPT voltage range
|
33 – 45 V
|
|
Operating Range
|
25 - 58 V
|
|
Min/Max Start Voltage
|
30 V / 58 V
|
|
Max input DC voltage
|
60 V
|
|
Max DC short circuit current (module Isc)
|
15 A
|
|
Overvoltage class DC port
|
II
|
|
DC port backfeed under single fault
|
0 A
|
|
PV array configuration
|
1 x 1 ungrounded array; No additional DC side protection required; AC side protection requires max 20A per branch circuit
|
Output (AC)
|
Peak Output Power
|
330 VA
|
|
Maximum continuous output power
|
325 VA
|
|
Nominal (L-L) voltage/range˛
|
240 V / 211-264 V
|
|
Maximum continuous output current
|
1.35 A
|
|
Nominal frequency
|
60 Hz
|
|
Extended frequency range
|
50 - 68 Hz
|
|
Max units per 20 A (L-L) branch circuit
|
11
|
|
Power factor at rated power
|
1.0
|
|
Overvoltage class AC port
|
III
|
|
AC port backfeed current
|
30 mA
|
|
Power factor setting
|
1.0
|
|
Power factor (adjustable)
|
0.85 leading ... 0.85 lagging
|
Features
Easy to Install
- Lightweight and compact with plug-n-play connectors
- Power Line Communication (PLC) between components
- Faster installation with simple two-wire cabling
High productivity and reliability
- Produce power even when the grid is down
- More than one million cumulative hours of testing
- Class II double-insulated enclosure
- Optimized for the latest high-powered PV modules
Grid-forming
- Complies with the latest advanced grid support
- Remote automatic updates for the latest grid requirements
- Configurable to support a wide range of grid profiles
- Meets CA Rule 21 (UL 1741-SA) requirements
Detailed Description
Enphase's newest IQ8 Microinverters are the industry’s first grid-forming microinverters with split-phase power conversion capability to convert DC power to AC power efficiently. The brain of the semiconductor-based microinverter is a proprietary application-specific integrated circuit (ASIC) that enables the microinverter to operate in grid-tied or off-grid modes. This chip is built in advanced 55nm technology with high speed digital logic and has super-fast response times to changing loads and grid events, alleviating constraints on battery sizing for home energy systems.
