![](/v/vspfiles/templates/EcoDirect2/images/DBox_Border_Left_Top.gif) |
![](/v/vspfiles/templates/EcoDirect2/images/clear1x1.gif) |
![](/v/vspfiles/templates/EcoDirect2/images/DBox_Border_Right_Top.gif) |
![](/v/vspfiles/templates/EcoDirect2/images/clear1x1.gif) |
Enphase > IQ8 475 Watt Commercial MC4 Micro Inverter - IQ System
Enphase IQ8P microinverter, compatible with 72-cell PV modules, 4 pin EN4 Bulkhead Connector for US market. This product is supplied with MC4 connectors.
The high-powered, smart grid-ready Enphase IQ8P-3P and IQ8H-3P Microinverters are specifically designed for 208 V threephase interconnection for small commercial solutions.
Each microinverter integrates with the IQ Gateway Commercial 2 and the Enphase App monitoring and analysis software.
With simplified design, improved energy harvesting, and advanced
monitoring, microinverters offer true peace of mind during operation
and maintenance.
Model
|
IQ8P-3P-72-E-US
|
Series
|
IQ8
|
Manufacturer
|
Enphase Energy
|
NOTE: To ensure the best installation experience, Enphase is requiring that installers complete IQ8 training and certification online
to enable IQ8 system commissioning in the field
. For Enphase PV-certified installers, IQ8 training is an add-on qualification course and
for those who are non-certified installers you can access the training by
completing an online assessment through
Enphase University
.
We recommend having 100% of your installers take this certification course if you do Enphase installations.
|
Mechanical
Type
|
Grid Tie - Micro Inverter
|
Ambient Temperature Range
|
-40°C to +65°C (-40°F to +149°F)
|
Relative humidity range
|
4% to 100% (condensing)
|
DC connector type
|
Enphase EN4 bulkhead; ECA-EN4-S22-12 : EN4 (TE PV4-S SOLARLOK) 150 mm/5.9" to Staubli MC4 adapter cable pair (Default supply)
|
Dimensions (H x W x D)
|
265 mm x 200 mm x 35 mm (10.4" x 7.9" x 1.4") without bracket
|
Weight
|
3.5 lb (1.6 kg)
|
Cooling
|
Natural convection
|
Approved for wet locations
|
Yes
|
Enclosure
|
Class II double-insulated, corrosion resistant polymeric enclosure
|
Environmental category/UV exposure rating
|
Outdoor—NEMA Type 6/IP67
|
Input (DC)
Commonly used module pairings:
Recommended PV Power (STC)
|
380–640 W
|
Module compatibility
|
54-cell/108 half-cell, 60-cell/120 half-cell, 66-cell/132 half-cell and 72-cell/144 half-cell
|
Maximum input DC voltage
|
63 V
|
Peak power tracking voltage
|
35.5–53 V
|
Operating range
|
16 - 63
|
Min./Max. start voltage
|
21/63
|
Max. DC continuous current (module Imp)
|
14 A
|
Max. input DC short-circuit current
|
25 A
|
Max DC short circuit current (module Isc)
|
20 A
|
Overvoltage class DC ports
|
II
|
DC port backfeed current
|
0 A
|
PV array configuration
|
1 x 1 ungrounded array; no additional DC side protection required; AC side protection requires max 20A per branch circuit
|
Output(AC)
Peak Output Power
|
480 VA
|
Maximum continuous output power
|
475 VA
|
Nominal (L-L) voltage/range²
|
208 @ 183–229 V
220 @ 198–242 V
|
Maximum continuous output current
|
208 @ 2.28 A
220 @ 2.16A
|
Nominal frequency
|
60 Hz
|
Extended frequency range
|
47 - 68 Hz
|
Max units per 20 A (L-L) branch circuit
|
208 @ 12
220 @ 12
|
Power factor at rated power
|
1.0
|
Overvoltage class AC port
|
III
|
Power factor setting
|
1.0
|
Power factor (adjustable)
|
0.85 leading ... 0.85 lagging
|
Features
Communication
|
480 VA
|
Maximum continuous output power
|
475 VA
|
Compliance
|
CA Rule 21 (UL 1741-SB), UL 62109-1, UL1741/IEEE1547, FCC Part 15 Class B, ICES-0003 Class B, CAN/CSA-C22.2 NO. 107.1-01. This product is ULListed
as PV rapid shutdown equipment and conforms with NEC 2014, NEC 2017, and NEC 2020 section 690.12 and C22.1-2018 Rule 64-218 rapid
shutdown of PV systems for AC and DC conductors, when installed according to manufacturer’s instructions.
|
Additional Product Features
Easy to Install
- Lightweight and compact with plug-n-play connectors
- Power Line Communication (PLC) between components
- Faster installation
High productivity and reliability
- More than one million cumulative hours of testing
- Class II double-insulated enclosure
- Optimized for the latest high-powered PV modules
Grid-forming
- Complies with the latest advanced grid support
- Remote automatic updates for the latest grid requirements
- Configurable to support a wide range of grid profiles
- Meets CA Rule 21 (UL 1741-SA) and IEEE 1547 (UL 1741-SB) requirements
|
|
![](/v/vspfiles/templates/EcoDirect2/images/clear1x1.gif) |
![](/v/vspfiles/templates/EcoDirect2/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/EcoDirect2/images/clear1x1.gif) |
![](/v/vspfiles/templates/EcoDirect2/images/DBox_Border_Right_Bottom.gif) |
|
![](/v/vspfiles/templates/EcoDirect2/images/clear1x1.gif) |
![](/v/vspfiles/templates/EcoDirect2/images/clear1x1.gif)
|