SolarEdge > 7600 Watt 240 Volt AC Single Phase Grid-Tie Inverter with Revenue Grade Meter
Single Phase Solar Inverters - with Rapid Shutdown and Built-In Revenue Grade Meter (RGM)
7600W, 240VAC, 60Hz, DC Disconnect, 2 Unfused Input, No MPPT, Ungrounded, RS485 and Ethernet,
Arc-Fault Protection, Rapid Shutdown and Built-In Revenue Grade Meter (RGM)
Specifications
|
Model
|
SE7600A-US002NNR2 |
|
Series
|
Single Phase Inverters
|
|
Manufacturer
|
SolarEdge
|
Mechanical
|
Type
|
Grid-Tie
|
|
Operating Temperature Range
|
-25° C - 60° C
|
|
Enclosure
|
NEMA 3R
|
|
Cooling
|
Natural Convection
|
|
Dimensions (W x H x D)
|
30.5" x 12.5" x 7.2"
|
|
Weight
|
54.7 lbs
|
|
Shipping Method
|
Ground
|
Input (DC)
|
Maximum DC Power (STC)
|
10250 W
|
|
Max Voltage
|
500 V
|
|
Peak Power Tracking Voltage
|
N/A
|
|
Min Start Voltage
|
N/A
|
|
Max Input Current
|
23 ADC
|
Output (AC)
|
Nominal Output Power
|
7,600 W
|
|
Voltage Range
|
211 - 240 - 264 VAC
|
|
Frequency
|
60.0 Hz
|
|
Max Current
|
32 A
|
Documentation
Detailed Description
The SolarEdge DC-AC PV inverter is specifically designed to work with
the SolarEdge power optimizers. Because MPPT and voltage management are
handled separately for each module by the power optimizer, the inverter
is only responsible for DC to AC inversion. Consequently, it is a less
complicated, more cost effective, more reliable solar inverter with a
standard 12 year warranty, extendable to 20 or 25 years.
A proprietary data monitoring receiver has been integrated into the
single phase solar inverter and aggregates the power optimizer
performance data from each PV module. This data can be transmitted to
the web and accessed via the SolarEdge monitoring portal for performance
analysis, fault detection and troubleshooting of PV systems. The
SolarEdge PV inverter combines sophisticated digital control technology
with efficient power conversion architecture to achieve superior solar
power harvesting and best-in-class reliability. The fixed string voltage
ensures operation at the highest efficiency at all times (98% weighted
efficiency) independent of string length and temperature.
The single phase inverter comes with a built-in DC switch, is
lightweight and can be installed by a single person on a supplied
bracket.
- Built-In Rapid Shutdown functionality for NEC 2014 690.12
- Integrated arc fault protection (Type 1) for NEC 2011 690.11 compliance (part numbers ending in “-U”)
- Superior efficiency (>97%)
- Small, lightweight and easy to install on provided bracket
- Built-in module-level monitoring receiver
- Internet connection through Ethernet or Wireless via ZigBee
- Outdoor and indoor installation - IP65/NEMA 3R
- Fixed voltage inverter, DC/AC conversion only
- Pre-assembled AC/DC Safety Switch for faster installation
- Optional – Built-in Revenue Grade Meter, ANSI C12.1
