Tamarack Solar > Top of Pole Mount for Six Solar Panels - High Wind & Snow Load version - 132 Inch Channel per column

Manufacturer Part Number: TTP-A-6HW

Mount 6 modules with a total area of 150 square feet or less on a 6-inch Schedule-40 or schedule-80 pole

Pole Top for 6-inch Schedule 40 or 80 pipe for 6 modules up to 43-inch width Mount requires 2 pieces of 2-inch Sch 80 pipe. Buy locally.

Note: TTP-A-6HW ships without 2-inch Schedule 80 pipe

Features

• 132-inch rails per column accommodate 6 modules with widths up to 43 inches
• Mounts on user-supplied 6-inch schedule-40 or schedule 80 steel pipe
• Module clamps fit frames between 30 to 40 mm deep*
  * Deeper frames can be used by adding 50/50+ mounting clamp sold separately 89907
• No complex sizing documents or need to send module data sheets when ordering
• Heavy-Duty Steel structure and Tamarack 3.1 aluminum module mounting rails
• Module Rails attach to 2-inch schedule 80 steel pipe. Purchase this pipe locally to save shipping cost or order appropriate length separately.Use two 10-foot pipes for module up to 78-inches long.Use two 12 foot pipes for modules up to 98-inches long
• 10° to 60° tilt angle
• UPS Shippable in 3 boxes
• Engineered for 160 mph wind speed and 250 psf snow load.

TTP-A-6HW ships without 2-inch Schedule 40 pipe

• PIPE KIT-HD10 - four 2-inch Sch-80 5-foot pipes and 2 couplings.
Use with modules up 78-inches long. 104 lbs.

• PIPE KIT-HD12 - four 2-inch Sch-80 6 foot pipes and 2 couplings.
Use with modules up 98-inches long. 124 lbs.

Note: Pipe Kits above are shipped in 5-foot or 6-foot sections with couplings so they can shipped by UPS.