 |
 |
 |
|
UniRac SolarMount Mid Clamp EFJ > Single Unit
Manufacturer Part Number: 320009
Detailed Description:
Includes clamps with T-bolts and flange nuts. To calculate mid clamps needed for each row, take one less than the number of modules in the row and multiply that figure by 2. For example, a row of 4 modules requires 6 mid clamps: (4 - 1) x 2 = 6. These mid clamps fit size E (modules 50 52 mm thick (1.97 - 2.05)), size F (modules 45 47 mm thick (1.77 - 1.85)), and size J (modules 41 43 mm thick (1.61 - 1.69)). Clear anodized aluminum finish.
Select top mounting clamps if you prefer to install modules after securing the footings and the rails. This sequence is especially well suited for flush mounting.
Top mounting clamps do not use module mounting holes, thus allowing flexibility in rail placement. Top mounting requires 1 inch between modules. Rails must extend 1½ inches beyond the last module on each end. You will need 1 kit for each row of modules you plan to mount.
Note: Dark Bronze anodized looks black. Clear anodized looks silver. Pick the rail and accessories to match the color of your module frames.
About SolarMount
Save time and money with SOLARMOUNT, the worlds most versatile PV mounting system. The universal SOLARMOUNT rail system has three options that can be assembled into a wide variety of PV mounting structures to accommodate any job site: SOLARMOUNT Flush, SOLARMOUNT High Profile Tilt, and SOLARMOUNT Low Profile Tilt.
Benefits of the SolarMount System:
- Maximum flexibility: flush, high-profile, or low-profile configurations for all locations
- Ease of installation: minimized penetration with longer attachment spans than competitive products
- Complete technical support: installation and code compliance documentation
- Core component for UniRac mounting solutions: incorporated into UniRac's other major product lines
|
|
|
 |
|
 |
|
