Xantrex 3000 Watt 24 Volt Inverter
Pure Sine Wave
Manufacturer Part Number: 815-3024
This is the next generation of Xantrex's Freedom SW inverters. Adding a new list of features, such as parallel and series stacking options, to the SW's existing features makes these pure sine wave inverters powerful and versatile.
Features
- Pure sine wave output to operate sensitive electronics
- Built-in transfer switch automatically transfers between inverter power and incoming AC power
- Parallel and Series stacking capabilities
- Temperature compensated charging for most climate conditions
- Conformal coated circuit boards for humid environments
- 2 Year Warranty
Specifications
|
Inverter
|
Freedom SW 3024
(815-3024)
|
|
Output power (continuous at 40°C)
|
3000 W
|
|
Surge rating (5 seconds)
|
6000 W
|
|
Peak output current
|
80 A
|
|
Output frequency
|
60 Hz +/- 0.2 Hz
|
|
Output voltage
|
120 Vac
|
|
Output wave form
|
Pure sine wave
|
|
Optimal efficiency
|
90%
|
|
No-load power draw (inverting)
|
3 Adc
|
|
Input DC voltage range
|
10 - 16 Vdc
|
|
AC connections
|
Split phase in / dual out, Dual in / dual out
|
|
Charger
|
|
Output current (continuous at 25°C)
|
150 A
|
|
Output voltage
|
24 Vdc
|
|
Output voltage range
|
3 - 16 Vdc
|
|
Charge control
|
3 stage with manual equalize
|
|
Charge temperature compensation
|
Remote battery sensor (included)
|
|
Optmial Efficiency
|
> 85%
|
|
AC input power factor (maximum charge)
|
0.98 typical
|
|
Input current (for maximum charging)
|
24 A rms nominal
|
|
Input AC voltage
|
120 Vac
|
|
Input AC voltage range
|
85 - 140 Vac
|
|
Dead battery charge
|
> 3 Vdc
|
|
General
|
|
Compatible battery types
|
Flooded / gel / AGM
|
|
Transfer relay rating
|
2 legs at 30 A each
|
|
Transfer time (AC to inverter and inverter to AC)
|
< 20 ms
|
|
Optimal operating temperature range
|
- 4°F to 140°F
(- 20°C to 60°C)
|
|
Storage ambient temperature range
|
- 40°F to 185°F
(- 40°C to 85°C)
|
|
Unit dimensions (H x W x L)
|
7.75" x 13.5" x 15.25"
(19.7 x 34.3 x 38.7 cm)
|
|
Unit weight
|
33.5 kg
(73.7 lbs)
|
|
Warranty
|
2 years
|
|
Shipping dimensions (H x W x L)
|
11.8" x 17.1" x 20.5"
(30 x 43.5 x 52.2 cm)
|
|
Master carton weight
|
35 kg
(77 lbs)
|
|
Part Number
|
815-3024
|
Documentation
Detailed Description
The NEW GENERATION Freedom SW series represents highly sophisticated and advanced inverter / chargers available in 3000 W with 150 A charger and 2000 W with 100 A charger models. The second generation 2000 watt model has been completely redesigned to include many of the same great features found
in its high power counterpart. A key feature enhancement is ‘Generator Support Mode’ which enables the Freedom SW to supplement a generatorą
when AC loads exceed the generator’s capacity. The new generation models also feature improved AC transfer/AC input detection time, providing
the ability to transfer AC loads to batteries in less than 10 milliseconds when the incoming grid or generator power is lost. Connected loads are almost unable to feel the power transition due to this quick transfer time. Both models are approved to UL458 with marine supplement, CSA, ABYC and FCC, Class B requirements.
The versatile SW Series is designed for a variety of mobile
applications such as commercial, emergency and recreational vehicles,
marine vessels, construction and military equipment.
Parallel and Series Stacking
- Parallel stacking enables the Freedom SW inverter/chargers to double the AC output in inverter mode
- Series stacking enables the Freedom SW inverter/chargers to generate 120/240 V split phase output
Application
Designed for a variety of mobile applications such as commercial, emergency and recreational vehicles, marine vessels, construction and military equipment.
