SnapNRack Critter Guard, Array Edge Screen Kit > 100 linear-foot, 6" screen
Universal Array Guard system - attaches to any solar array
Keep Animals and debris out, no drilling into PV Modules!
SnapNRack 242-04105 Array Edge Screen Fastener sold separately. 40 fasteners per 100' of screen is most common.
Specifications
Application:
|
Pitched roof
|
Dimensions:
|
1200" × 6"
|
Product Line:
|
Series 100
|
Model ID/Number:
|
232-04077
|
Documentation
Data Sheet
|
SnapNrack Series 100 Array Edge Screen Brochure
|
Manual
|
SnapNrack Series 100 UL Install Manual
|
Features:
- 1/2" x 1/2" Galvanized Steel Mesh
- Black Poly Coating
- 6" x 100' roll for any configuration
- All Black Corrosion Resistant Hardware
- Simple Slip Slide On Clip Attachment
- No Drilling into PV Module!
Universal Array Guard system - attaches to any solar array
Keep Animals and debris out, no drilling into PV Modules!
Note: These attach to the underlide lip of your solar module's frame, if your modules do not have a lip for the
screen clips to attach to, you will need to also purchase:
SnapNRack 242-01101 > Add-A-Lip Frame Adapter for Array Edge Screen
The new Array Edge Screen (Critter Guard) is designed to keep birds and other pesky critters from making their home under the array. The fasteners attach to the bottom flange of the module frame and have hooks to snap the screen into place. The fastener are painted steel and can be snapped to the appropriate length to accommodate height variations. The mesh screen is vinyl-coated steel, rigid enough to keep out even the most industrious squirrel. The box frame adaptor allows for mounting on module frames that lack a flange to mount to (1 per fastener).
Installs on perimeter of solar array between solar panels and the roof.
SnapNRack Array Edge Screen is an attractive system that mounts a mesh screen around the edge of a PV module array to protect from infiltration by birds, rodents and debris. The kit includes all the hardware necessary to install the screen around any array configuration. The SnapNRack Edge Screen fastener mount to the underside of the module without any drilling required. The SnapNRack Array Edge Screen protects your array without voiding the module warranty! The black poly coated screen and all the black hardware offer a long lasting protective solution as well as creating a clean visual aesthetic.
Module fastener spaced every 3-4 feet will provide a protective barrier to guard against animals and debris. Screens can be trimmed to required height and length with common sheers.
Includes: 8" x 100' roll Black Poly Coated Screen
(Edge Screen Fastener sold separate, 40 fasteners recommended per 100' screen)
Also known as:
SnapNRack 015-11177 (legacy part #)